Preparing for Use
R&S
®
SMBV100A
56Operating Manual 1176.8016.02 ─ 17
– "SCPI Remote Trace" records messages exchanged via the remote control
interface, see Chapter 2.8.2.5, "SCPI Remote Trace", on page 60.
●
"Help"
– "Glossary" explains terms related to the LXI standard.
– www.rohde-schwarz.com opens the Rohde & Schwarz home page.
► Press the "INACTIVE (press to toggle)" button to activate the connection.
A green flashing status LED indicates the active connection. If the LAN connection
fails, the LED turns red.
The status of the LAN connection is also indicated by the "LAN Status indicator" in
the "LXI Status" dialog.
For further information, see section "LXI Status" in the Operating Manual.
2.8.2 LAN Configuration
The "LAN Configuration" web page provides access to the parameters required for
identifying the R&S SMBV in the network, and allows modification.
Password protection
Changing the LAN configuration is password-protected. The default password is Lxi-
WebIfc (notice upper and lower case characters). This password cannot be changed in
the current firmware version.
It comprises the following navigation entries.
● IP Configuration...................................................................................................... 56
● Advanced LAN Configuration..................................................................................57
● Ping Client...............................................................................................................58
● Web Control............................................................................................................ 59
● SCPI Remote Trace................................................................................................60
2.8.2.1 IP Configuration
The "IP Configuration" page displays all mandatory LAN parameters.
LXI Configuration
To Next Page
Loading...
