Rohde & Schwarz SMBV100A - Description of the Connectors

Preparing for Use
R&S
®
SMBV100A
29Operating Manual 1176.8016.02 ─ 17
Figure 2-2: Rear panel view
2.2.1 Description of the Connectors
I OUT / Q OUT
Direct output or Differential (non-inverting) output for analog I/Q signal.
I OUT BAR / Q OUT BAR
Differential (inverting) output for analog I/Q signal.
MARKER 1, 2
Outputs 1 and 2 for triggering and control of external devices with user-definable
marker signals.
For more information see section "Global Trigger/Clock/Input Settings" in the Operating
Manual.
USB IN
USB (universal serial bus) interface of type B (device USB).
This interface can be used for remote control of the instrument.
USB CONNECTORS TYPE A
USB (universal serial bus) interfaces of type A (host USB).
●
Connection of peripherals such as mouse, keyboard, etc.
●
Connection of memory stick for file transmission
Rear Panel Tour