Rohde & Schwarz SMBV100A - Example of Setup

Getting Started
R&S
®
SMBV100A
69Operating Manual 1176.8016.02 ─ 17
RF settings include:
●
Frequency and reference frequency
●
Attenuator settings.
●
Frequency and level sweep
●
List Mode settings. In this mode, extremely fast frequency and level settings can be
made.
Note: Numeric values for frequency and level are entered best and quickest with the
aid of the FREQ and LEVEL keys.
Available analog modulation modes:
●
Amplitude modulation
●
Pulse modulation (option R&S SMBV-K22).
Note: For modulation modes that can be simultaneously used, refer to the R&S SMBV
data sheet.
3.4 Example of Setup
This section provides an example on how to configure the instrument to generate and
display a simple QPSK-modulated signal.
Configuring and displaying a QPSK-modulated signal
To generate and display a QPSK-modulated signal, proceed as follow:
1. Activate default (preset) state.
Press the PRESET key to set a defined instrument state.
2. Select and activate digital modulation
Example of Setup