Rohde & Schwarz SMBV100A - Map Network Share Settings

Instrument Function
R&S
®
SMBV100A
168Operating Manual 1176.8016.02 ─ 17
Copy
Copies the selected file. It can be pasted into a different or the same directory using
the "Paste" button. When pasting the file into the same directory file name
Copy of <file name> is given automatically. When pasting the file into a different
directory, the original file name is kept.
Remote command:
:MMEMory:COPY on page 568
Paste
Pastes the file that has been copied or cut before.
Remote command:
n.a.
Rename
Renames the selected file or directory. The new name can be entered in the "New File-
name" dialog.
Remote command:
:MMEMory:MOVE on page 574
Delete
Deletes the selected file. Before the file is deleted, a message appears prompting the
user to confirm deletion of the file.
Remote command:
:MMEMory:DELete on page 573
Create New Directory
Creates a new directory. The name of the new directory can be entered in the "New
Directory" dialog.
Note: When the subdirectory is entered, it is possible to enter an absolute path name
(e.g. /var/user/MEAS) or the path relative to the current directory (e.g. ../MEAS).
The directory is created as a subdirectory in the selected level.
Remote command:
:MMEMory:MDIRectory on page 574
5.2.8.6 Map Network Share Settings
The "Map Network Share" dialog provides settings that are very similar to the standard
Windows Explorer function "Map network drive". These settings help you to create up
to 10 "shortcuts" to shared folders or computers in the network.
The dialog displays a list of current mapped network folders. The directory tree of the
"File Manager", "Save/Recall" and "File Select" dialogs indicates a mapped network
folder as /shares/<"Local Folder">.
General Instrument Settings