Instrument Function
R&S
®
SMBV100A
167Operating Manual 1176.8016.02 ─ 17
●
Copying files into another directory, see Copy and Paste
●
Renaming and deleting files, see Rename and Delete
●
Creating new directories on the follwoing drives:
– hard disk
(requires option R&S SMBV-B92)
– internal flash card
– memory stick
See Create New Directory
●
Mapping shared network folders, see Chapter 5.2.8.7, "Mapping a Network Folder",
on page 169
For more information, see Chapter 4.7.2, "File Manager", on page 108.
File Type
Selects the file type to be listed. If you select a file type with a specific file extension,
only files with this extension are listed in the directory.
Remote command:
n.a.
Directory and File Name
Selects the directory in which the file to be deleted or copied is located. The dialog lists
all files in this directory. Selected files are highlighted. The path is indicated above the
directory window.
Unlike the "Save/Recall" and "File Select" dialogs, the "File Manager" displays the full
file names including extensions.
Remote command:
:MMEMory:CDIRectory on page 568
Cut
Cuts the selected file. It can be pasted into a different directory using the "Paste" but-
ton.
Remote command:
:MMEMory:DELete on page 573
General Instrument Settings
To Next Page
Loading...
