Instrument Function
R&S
®
SMBV100A
161Operating Manual 1176.8016.02 ─ 17
Accesses the settings for storing ("Save") and loading ("Recall") of the instrument set-
tings.
"Save…"
Calls the menu for storing the current instrument setting (see Chap-
ter 5.2.8.2, "Saving Instrument Settings", on page 161).
"Recall..."
Calls the menu for calling up a saved instrument setting (see Chap-
ter 5.2.8.3, "Loading Instrument Settings", on page 162).
5.2.8.2 Saving Instrument Settings
If "Save" is selected under "Select Operation", the file menu provides options for sav-
ing the current instrument setting in a file.
Recent files
Displays the files last used.
Directory, File List and File Name
Note:
You access this generic standard function each time you perform one of the following:
●
store or load (settings) files
●
define a folder these files are to be stored in or
●
navigate through the file system.
The name of the dialog is context sensitive but the provided functions are self-explana-
tory and very similar.
With the provided settings, you can perform the following:
●
to navigate through the file system, use the directory tree
●
to create a new file, load and store files, use the dedicated functions "New",
"Select", "Save" and Recent files.
●
to perform standard file management functions, like create new directories, move,
copy, delete files and/or directories, use the standard "File Manager" function (see
" File Manager" on page 162).
Remote command:
to list all files in a directory:
:MMEMory:CDIRectory on page 568
:MMEMory:CATalog? on page 567
refer to the description of firmware options for the syntax of the corresponding SCPI
command:
[:SOURce<hw>]:BB:<Digital Standard>:SETTing:CATalog
[:SOURce]:CORRection:CSET:CATalog? on page 723
to list files with user data:
General Instrument Settings
To Next Page
Loading...
