Rohde & Schwarz SMBV100A - Source:bb:DM Subsystem;[:Source<Hw>]:Bb:arbitrary:wsegment:sequence:select; Source:bb:DM Subsystem; [:Source<Hw>]:Bb:arbitrary:wsegment:sequence:select; The Following Section Contains the Commands for Generating the Digital Modulation Sig- Nal. Common Settings

Remote Control Commands
R&S
®
SMBV100A
648Operating Manual 1176.8016.02 ─ 17
[:SOURce<hw>]:BB:ARBitrary:WSEGment:SEQuence:SELect <Filename>
Selects the sequencing list (files with extension *.wvs)
Parameters:
<Filename> string
Example:
BB:ARB:WSEG:SEQ:SEL '/var/user/play_list_1’
selects the sequencing list play_list_1.wvs.
Manual operation: See "Sequencing List" on page 400
7.16.3.3 SOURce:BB:DM Subsystem
The commands in the SOURce:BB:DM subsystem are described in two sections, sepa-
rated into configuring digital modulation and lists for digital modulation.
DM General Remote-Control Commands
The following section contains the commands for generating the digital modulation sig-
nal.
● Common Settings..................................................................................................648
● Clock Settings....................................................................................................... 652
● Trigger Settings.....................................................................................................654
● Marker Settings.....................................................................................................661
● Filter Settings........................................................................................................ 664
● Modulation Settings...............................................................................................667
● Power Ramp......................................................................................................... 671
Common Settings
[:SOURce<hw>]:BB:DM:PATTern....................................................................................648
[:SOURce<hw>]:BB:DM:PRBS[:LENGth]..........................................................................649
[:SOURce<hw>]:BB:DM:PRESet..................................................................................... 649
[:SOURce<hw>]:BB:DM:SOURce.................................................................................... 649
[:SOURce<hw>]:BB:DM:SRATe...................................................................................... 650
[:SOURce<hw>]:BB:DM:STANdard..................................................................................650
[:SOURce<hw>]:BB:DM:STATe.......................................................................................651
[:SOURce<hw>]:BB:DM:SWITching:SOURce................................................................... 651
[:SOURce<hw>]:BB:DM:SWITching:STATe......................................................................652
[:SOURce<hw>]:BB:DM:PATTern <Pattern>, <BitCount>
The command selects the data pattern for the internal data.
Parameters:
<Pattern> numeric
*RST: #H0
<BitCount> integer
Range: 1 to 64
*RST: 1
SOURce Subsystem