Rohde & Schwarz SMBV100A - Front Panel Key Emulation

Manual Operation
R&S
®
SMBV100A
113Operating Manual 1176.8016.02 ─ 17
Front-panel key Key of PC keyboard Function
G/n / dBuV ALT + F9 Selects the unit Giga/Nano, dBuV for the RF level
and dBu for the LF level.
HCOPY CTRL+ Y Opens the menu for configuring and starting a
hardcopy.
HELP F1 Opens/closes context-sensitive help.
HIDE CTRL+ H Minimizes the active menu. Pressing the respec-
tive button in the Winbar opens the menu again.
INFO CTRL + I Opens/closes the info window
INSERT Ins Activates the insert mode.
k/m / uV ALT + F11 Selects the units Kilo/Milli and uV for RF levels.
LEVEL CTRL + L Activates the level entry.
LOCAL CTRL + Q Switches the instrument from remote control to
manual control.
M/u / uV ALT + F10 Selects the units Mega/Micro and uV for levels.
MENU CTRL + M Calls the menu selection list.
MOD ON/OFF CTRL + O Switches modulation on/off. "MOD OFF" is indica-
ted in the status line.
TOGGLE CTRL + T Switches a block or parameter on/off.
Toggles between the different possibilities of set-
ting a selection parameter.
PRESET CTRL + P Restores a defined basic instrument setup.
REARR CTRL + A Adjusts the size of the active menu to use the
whole height of the dislay.
RECALCULATE CTRL + C Starts recalculation of the signal.
RF ON/OFF CTRL + R Switches the RF output signal on/off. "RF OFF" is
indicated in the status line.
SETUP CTRL + E Opens the setup menu for general instrument set-
tings.
Softkeys CTRL + F1 – F6 Triggers the function assigned to the softkey.
WINBAR CTRL + W Toggles between the active menus.
4.8.1 Front Panel Key Emulation
The R&S SMBV provides a front panel key emulation to enable execution of the front
panel key functions by mouse e.g. for remote access. The emulation is called by a right
mouse click. The front panel key functions are executed by a mouse click on the asso-
ciated button.
Legend of Front-Panel Controls