Rohde & Schwarz SMBV100A - Legend of Front-Panel Controls

Manual Operation
R&S
®
SMBV100A
112Operating Manual 1176.8016.02 ─ 17
Function/Digital
Standard
List type Contents File suffix
Settings DAB ETI Files
*.eti
*.xeti
NFC Settings Complete setting of the NFC menu
*.nfc
4.8 Legend of Front-Panel Controls
The following table lists all key functions available on the front panel. Key combinations
used on the PC keyboard to trigger key functions on the instrument front panel are also
described. Keyboard labels are described in alphabetical order.
In addition, a front panel key emulation and an on-screen keyboard can be used for
manual operation by mouse only.
Table 4-2: Cross-reference between the front panel keys and keyboard shortcuts
Front-panel key Key of PC keyboard Function
Turning the rotary
knob
Tab key (towards the right)
Shift + Tab (towards the left)
Sets the cursor with the rotary knob.
Pressing the rotary
knob
Enter Pressing the rotary knob confirms an entry; it has
the same function as the ENTER key.
Arrow keys Arrow keys Moves the cursor.
*1 / dB(m) ALT + F12 Confirms entries in the base unit and values with-
out a unit.
Selects dBm for the RF level and dB for level offset
and level step width.
. / *...# . / *...# Enters a period/decimal point. Enters a special
character.
+/- / A<->a - / (shift+) a... z Enters the sign.
Switches between upper-case and lower-case let-
ters.
0-9 / a...z CTRL+ 0-9 / a...z CTRL Enters the number/letter.
BACKSPACE Backspace Clears the last entry (number, sign or decimal
point)
CLOSE CTRL + G Closes an active menu.
DIAGRAM CTRL+ D Sets the cursor on the block diagram and hides all
menus.
ENTER Enter Terminates an entry.
ESC ESC Selects the next higher menu/selection level. When
the editing mode is exited with ESC, the previous
value is restored.
FILE CTRL + S Activates the menu for storing instrument settings.
FREQ CTRL+ F Activates the frequency entry.
Legend of Front-Panel Controls