Rohde & Schwarz SMBV100A - Help System - Help Key; Messages - Info Key

Instrument Function
R&S
®
SMBV100A
158Operating Manual 1176.8016.02 ─ 17
"Prefix, Year,
Month, Day"
Determines the rules for "Automatic Naming".
Per default, the automatically generated file name is composed of:
<Path>/<Prefix><YYYY><MM><DD><Number>.<Format>, where
Y, M and D mean Year, Month, Day; Number is the "Current Auto
Number".
You can deactivate/activate each component separately.
The "Resulting File Name" indicates the current file name syntax.
Remote command:
:HCOPy:FILE[:NAME]:AUTO[:FILE]:PREFix:STATe on page 560
:HCOPy:FILE[:NAME]:AUTO[:FILE]:PREFix on page 560
:HCOPy:FILE[:NAME]:AUTO[:FILE]:YEAR:STATe on page 559
:HCOPy:FILE[:NAME]:AUTO[:FILE]:MONTh:STATe on page 559
:HCOPy:FILE[:NAME]:AUTO[:FILE]:DAY:STATe on page 559
"Current Auto
Number"
Indicates the number which is used in the automatically generated file
name.
Note: When initially switching on the instrument the number is reset
to the lowest possible value. Starting with number 0 the output direc-
tory is scanned for already existing files. As long as files with the
same name are existing the number is increased by 1. The number is
automatically set so that the resulting file name will be unique within
the selected path. The current number is not in the save/recall file but
will be temporarily stored within the database. At following save oper-
ations the number is increased.
Remote command:
:HCOPy:FILE[:NAME]:AUTO[:FILE]:NUMBer? on page 560
"Resulting File
Name"
Indicates the automatically generated file name.
Remote command:
:HCOPy:FILE[:NAME]:AUTO:FILE? on page 559
Save
Saves the hard copy.
Remote command:
:HCOPy[:EXECute] on page 558
5.2.6 Messages - Info Key
The INFO key opens a window containing a detailed description of every message dis-
played in the info bar, see Chapter 4.2.3, "Info Window", on page 84 and Chapter 9,
"Status Information, Error Messages and Troubleshooting", on page 852.
5.2.7 Help System - Help Key
The HELP key opens a browser window containing a context-sensitive description of
the highlighted parameter.
General Instrument Settings