Instrument Function
R&S
®
SMBV100A
157Operating Manual 1176.8016.02 ─ 17
File Options
Dialog for setting the file parameters.
"Format"
Selects the output file format, for example *.bmp,
*.jpg*.xpm*.png.
Remote command:
:HCOPy:IMAGe:FORMat on page 558
:HCOPy:DEVice:LANGuage on page 558
"Region"
Selects the snapshot area, either the entire screen or the currently
active dialog.
Remote command:
:HCOPy:REGion on page 561
"Automatic
Naming"
If enabled, creates the output filenames automatically according to
rules following the activated components.
"Path..."
Selects the directory.
Note: To select the destination path, you have to specify a file name
as well. Otherwise an error message is displayed and the selection is
canceled.
Directory, path and file name are displayed in the infoline right to the
"Path" button.
Remote command:
:HCOPy:FILE[:NAME]:AUTO:DIRectory on page 559
:HCOPy:FILE[:NAME]:AUTO? on page 558
"Clear Path"
Deletes all image files with extensions bmp, img, png, xpm and csv
in the directory set for automatic naming.
Before deleting the image files a warning message is displayed
requiring the confirmation.
Remote command:
:HCOPy:FILE[:NAME]:AUTO:DIRectory:CLEar on page 559
General Instrument Settings
To Next Page
Loading...
