Rohde & Schwarz SMBV100A - System Subsystem

Remote Control Commands
R&S
®
SMBV100A
821Operating Manual 1176.8016.02 ─ 17
:STATus:QUEue[:NEXT]?
Queries the oldest entry in the error queue and then deletes it. Positive error numbers
denote device-specific errors, and negative error numbers denote error messages
defined by SCPI. If the error queue is empty, 0 ("No error") is returned.
The command is identical to :SYSTem:ERRor[:NEXT]? on page 824.
Return values:
<Next> string
Example:
:STATus:QUEue?
queries the oldest entry in the error queue.
Response: 0, 'no error'
no errors have occurred since the error queue was last read out
Usage: Query only
7.18 SYSTem Subsystem
The SYSTem subsystem contains a series of commands for general functions which do
not directly affect signal generation.
:SYSTem:ERRor:ALL?................................................................................................... 822
:SYSTem:ERRor:CODE:ALL?......................................................................................... 823
:SYSTem:ERRor:CODE[:NEXT]?.................................................................................... 823
:SYSTem:ERRor:COUNt?...............................................................................................824
:SYSTem:ERRor[:NEXT]?...............................................................................................824
:SYSTem:ERRor:HISTory?............................................................................................. 824
:SYSTem:ERRor:HISTory:CLEar.....................................................................................825
:SYSTem:ERRor:STATic?.............................................................................................. 825
:SYSTem:HELP:EXPort..................................................................................................825
:SYSTem:DLOCk...........................................................................................................826
:SYSTem:KLOCk........................................................................................................... 826
:SYSTem:ULOCk...........................................................................................................826
:SYSTem:RCL............................................................................................................... 827
:SYSTem:SAV............................................................................................................... 827
:SYSTem:SECurity:VOLMode[:STATe]............................................................................ 827
:SYSTem:COMMunicate:GPIB:LTERminator.................................................................... 828
:SYSTem:COMMunicate:GPIB[:SELF]:ADDRess.............................................................. 828
:SYSTem:COMMunicate:NETWork[:COMMon]:DOMain.....................................................828
:SYSTem:COMMunicate:NETWork[:COMMon]:HOSTname............................................... 828
:SYSTem:COMMunicate:NETWork[:COMMon]:WORKgroup.............................................. 829
:SYSTem:COMMunicate:NETWork[:IPADdress]:DNS........................................................829
:SYSTem:COMMunicate:NETWork:IPADdress:MODE.......................................................829
:SYSTem:COMMunicate:NETWork:IPADdress................................................................. 830
:SYSTem:COMMunicate:NETWork[:IPADdress]:GATeway.................................................830
:SYSTem:COMMunicate:NETWork[:IPADdress]:SUBNet:MASK......................................... 830
:SYSTem:COMMunicate:NETWork:MACaddress.............................................................. 830
:SYSTem:COMMunicate:NETWork:STATus?................................................................... 831
SYSTem Subsystem