Rohde & Schwarz SMBV100A - Page 842

Remote Control Commands
R&S
®
SMBV100A
827Operating Manual 1176.8016.02 ─ 17
Example:
SYST:ULOC ON
Activates the user interface lock.
Manual operation: See "User Interface" on page 151
:SYSTem:RCL <Pathname>
Loads a file with previously saved instrument settings.
Setting parameters:
<Pathname> string
Example:
SYSTem:RCL
"/var/user/Instrument_settings.svrcltxt"
Usage: Setting only
Manual operation: See " Recall " on page 164
:SYSTem:SAV
<Pathname>
Saves the current instrument settings to a file with defined filename.
Setting parameters:
<Pathname> string
Example:
SYSTem:SAV
"/var/user/Instrument_settings.svrcltxt"
Usage: Setting only
Manual operation: See " Save" on page 162
:SYSTem:SECurity:VOLMode[:STATe] <SecPassWord>, <MmemProtState>
Activates volatile mode, so that no user data can be written to the internal memory per-
manently.
To enable volatile mode, reboot the instrument. Otherwise the change has no effect.
Parameters:
<MmemProtState> 0 | 1 | OFF | ON
*RST: 0
Setting parameters:
<SecPassWord> string
Current security password
The default password is 123456.
Example:
SYSTem:SECurity:VOLMode:STATe "123456", 1
SYSTem:REBoot
Manual operation: See "Volatile Mode" on page 151
SYSTem Subsystem