Instrument Function
R&S
®
SMBV100A
151Operating Manual 1176.8016.02 ─ 17
"SMB (Samba)"
activates access to SMB (Server Message Block), used for providing
shared access to files, printers and serial ports of a network.
"Avahi (Zeroconf)"
activates Avahi, a service for automatic configuration of the instru-
ment in a network environment.
"Software Update"
allows updating the instrument firmware via the LAN interface.
For more information on this topic see the release notes of the instru-
ment, provided on the Internet at the download site or the Rohde &
Schwarz Signal Generator home page.
USB Storage
Activates the access to external USB storage media.
This setting has no effect on a mouse or a keyboard, connected via USB.
Note: The setting will not be assigned until you enter the Security Password and con-
firm with Accept.
Volatile Mode
Acitivates write protection on the file system to prevent modification or erasure of val-
uable data.
Note: The setting will not be assigned until you enter the Security Password, confirm
with Accept, and reboot the instrument.
Remote command:
:SYSTem:SECurity:VOLMode[:STATe] on page 827
Annotation Frequency
Enables/disables the display of the currently used frequency in the header of the
instrument.
Note: The setting will not be assigned until you enter the Security Password and con-
firm with Accept.
Remote command:
:DISPlay:ANNotation:FREQuency on page 552
Annotation Amplitude
Enables/disables the display of the currently selected level in the header of the instru-
ment.
Note: The setting will not be assigned until you enter the Security Password and con-
firm with Accept.
Remote command:
:DISPlay:ANNotation:AMPLitude on page 551
User Interface
Allows you to lock the manual of the controls of the instrument, and to hide even the
entire display.
General Instrument Settings
To Next Page
Loading...
