Instrument Function
R&S
®
SMBV100A
150Operating Manual 1176.8016.02 ─ 17
Note: The new password will not be assigned until you select the Change Password
button.
Change Password ← Change Security Password
Changes the password accordingly.
Note: Keep in mind, that a changed password is never reset, even if you perform a
factory preset.
LAN Services
Opens the "LAN Services" dialog for individually enabling or disabling the available
LAN interface services.
Enable LAN Interface ← LAN Services
Enables the LAN interface in general, and thus provides remote access via all
unlocked services.
Note: The activated LAN services will not be assigned until you enter the Security
Password and confirm with Accept.
Enable LAN Services individually ← LAN Services
Enables or disables the following interface services individually.
"SCPI over LAN"
activates access over LAN to remotely control the instrument using
SCPI (Standard Commands for Programmable Instruments) com-
mands.
"VNC"
activates access via VNC (Virtual Network Computing) interface, a
graphical desktop sharing system that uses RFB protocol to remotely
control the instrument.
"SSH"
activates access via SSH (Secure Shell), a network protocol for
secure data communication.
"HTTP"
activates access via HTTP (Hyper Text Transfer Protocol), the appli-
cation protocol for hypermedia information systems.
"FTP"
activates access via FTP (File Transfer Protocol), used to transfer
files from a host to the instrument and vice versa.
General Instrument Settings
To Next Page
Loading...
