Rohde & Schwarz SMBV100A - File Manager

Instrument Function
R&S
®
SMBV100A
166Operating Manual 1176.8016.02 ─ 17
[:SOURce<hw>]:BB:DM:DLISt:CATalog? on page 675
[:SOURce<hw>]:BB:DM:CLISt:CATalog? on page 675
Functions for handling of data lists
Provided are the following standard functions for file handling:
"Select"
Select and load the file.
Remote command:
[:SOURce<hw>]:BB:DM:DLISt:SELect on page 681
Refer to the descriptions of the firmware options for the correct syntax of the corre-
sponding SCPI command:
[:SOURce<hw>]:BB:<Digital Standard>:...:DATA DLISt
[:SOURce<hw>]:BB:<Digital Standard>:...:DSELect
"New"
Creates new file with the specified "File Name".
To confirm, select "OK"; use "Cancel" to undo the operation.
To edit the file content, select "File Select > Edit".
"Edit"
Accesses the "Data List Editor" and loads the selected file for editing,
see "Data List Editor" on page 364.
Functions for handling of control lists
Provided are the following standard functions for file handling:
"Select"
Select and load the file.
Remote command:
[:SOURce<hw>]:BB:DM:CLISt:SELect on page 678
"New"
Creates new file with the specified name. To edit the file content,
select "File Select > Edit".
"Edit"
Access the "Control List Editor" and loads the selected file for editing,
see "Control and Marker List Editor" on page 365.
Recent files
Displays the files last used.
File Manager
Accesses the "File Manager" dialog, see Chapter 5.2.8.5, "File Manager",
on page 166.
Remote command:
n.a.
5.2.8.5 File Manager
The "File Manager" is a tool very similar to a standard Windows Explorer and helps
you manage mass storage media and files saved on the R&S SMBV.
You can perform the following tasks:
●
Copying multiple files from disk to other media and vice versa, see Chapter 5.2.8.8,
"Accessing the File System of the Instrument and Transferring Files from and to
the Instrument", on page 171
General Instrument Settings