Instrument Function
R&S
®
SMBV100A
124Operating Manual 1176.8016.02 ─ 17
home page. This home page always offers the latest information on your signal gener-
ator, e.g. also on changes of the firmware update procedure.
Remote command:
n.a.
Hardware Options / Software Options
The tables in the sections "Hardware", "Software" and "WinIQSIM2" list the installed
hardware and software options.
"Option"
Short name of option
"Designation"
Name of option
"Licenses"
(optional)
Number of licenses.
Remote command:
*OPT? on page 506
*IDN? on page 506
Versions
The "Versions" tab shows the versions of the technical specification of the R&S SMBV
and of the software components that comprise the firmware.
"Package"
Name of the component.
"Version"
Current issue of the component.
Remote command:
n.a.
Show Open Source Acknowledgments
Accesses the list of the used open source software packages and the corresponding
verbatim license texts.
5.2.3.4 Manage License Keys
This dialog is the central dialog for managing licenses, like enabling newly purchased
and/or newly registered options or performing the required instrument related steps
during the process of unregistration and/or moving of licenses.
An option is ready to operate after it is enabled by means of a license key code sup-
plied with the option. The license key is delivered as a file or on paper. Unregistered
licenses must be registered for a particular instrument prior to the corresponding option
can be enabled for operation.
License Registration
If your purchased license is delivered unregistered, you must register it before you can
activate the option.
For detailed information about the license registration, refer to the installation instruc-
tions provided with the option (Supplement A) and the documentation of the online tool
"Manage Licenses" (https://extranet.rohde-schwarz.com/service).
General Instrument Settings
To Next Page
Loading...
