Rohde & Schwarz SMBV100A - Kboard Subsystem; Hcopy:file[:Name]:Auto:state; Hcopy:region

Remote Control Commands
R&S
®
SMBV100A
561Operating Manual 1176.8016.02 ─ 17
:HCOPy:FILE[:NAME]:AUTO:STATe <State>
Activates automatic naming of the hard copy files.
Parameters:
<State> 0 | 1 | OFF | ON
*RST: 1
Example: See Example "Store a hard copy of the display" on page 556.
Manual operation: See "Automatic Naming" on page 156
:HCOPy:REGion
<Region>
Selects the area to be copied.
You can create a snapshot of the screen or an active dialog.
Parameters:
<Region> ALL | DIALog
*RST: ALL
Example: See Example "Store a hard copy of the display" on page 556.
Manual operation: See " File Options " on page 157
7.12 KBOard Subsystem
The KBOard system contains the commands to set the external keyboard.
:KBOard:LANGuage.......................................................................................................561
:KBOard:LAYout............................................................................................................ 562
:KBOard:LANGuage <Language>
This command selects the keyboard language. The assignment of some keys depends
on the selected language.
Parameters:
<Language> US | DE
*RST: US
Example:
KBO:LANG US
selects keyboard language American English.
Usage: SCPI confirmed
Manual operation: See "Layout (USB Keyboard Settings)" on page 142
KBOard Subsystem