Rohde & Schwarz SMBV100A - File Manager

Manual Operation
R&S
®
SMBV100A
108Operating Manual 1176.8016.02 ─ 17
Example:
The following example shows the "File Select" menu of the GSM/EDGE digital stan-
dard when "Recall Predefined Frames" is selected.
Working with the File Select dialog
1. Access the "File Select" dialog (see "Accessing files with user data" on page 106).
2. Navigate in the "File Select" dialog.
3. Load an existing file.
In the "Recall Settings" dialog, mark a file and press the "Select" button.
4. Save a file.
In the "Save Settings" dialog, enter file name in the "File Name:" field.
Select the directory to which the file is to be saved and then select the "Save" but-
ton.
5. Create a new file.
To create a new file, use the "Save Settings" functionality, i.e. specify file name and
directory and save the file.
The created file is empty; it must be filled with the necessary values in the individ-
ual editor.
4.7.2 File Manager
The "File Manager" allows general file management such as copying, shifting, renam-
ing and deleting files as well as generating new directories.
In addition it enables you to share the same storage area with another instrument over
the network.
Thus, also externally created files, for example waveforms created by using the
R&S
®
WinIQSIM2 program, can be saved to the R&S SMBV by copying them from a
memory stick or a network to the internal hard disk.
File Management