Manual Operation
R&S
®
SMBV100A
106Operating Manual 1176.8016.02 ─ 17
available. See Chapter 4.7.2.1, "Extensions for User Files", on page 109 for an over-
view of the supported file extensions.
The user data can be roughly divided into the following data types:
●
Settings
Settings, e.g. the frame setting of the GSM/EDGE standard, can be loaded and
current setting saved to the specified file.
●
Lists
Lists, e.g. user correction lists, can be loaded. They can be generated either exter-
nally or internally. For internal generation, a new list must be created in the "File
Select" dialog which will then be edited in the list editor of the individual menu.
●
Complex modulation and control data
User data of this type can be loaded. It can be generated either externally or inter-
nally. For internal generation, a new list must be created which will then be edited
in the data and control list editor. These functions are offered in the "Data List Man-
agement" dialog of the individual modulation menu.
●
Waveforms
Waveforms are generated externally (e.g. by means of the R&S WinIQSIM2 pro-
gram that is supplied together with the optional Baseband Generator R&S SMBV-
B10) and can be loaded in the "Arbitrary Waveform Generation" dialog.
Softkeys are assigned to some of the functions and can be used for convenient opera-
tion.
For more information, refer to:
●
Chapter 4.8, "Legend of Front-Panel Controls", on page 112 for an overview of key
functions and a cross-reference between the front panel keys and the keyboard
shortcuts
●
to "Instrument Functions" in the Operating Manual for a detailed description of key
functions.
Accessing files with user data
1. To access an editable user data file, select the "Save/Recall" or "File Manger" func-
tion in the individual dialog.
2. To access a loadable data file, select the "Select/New" or "File Manager" function
in the individual dialog.
File Management
To Next Page
Loading...
