Rohde & Schwarz SMBV100A - Hcopy:device:language; Hcopy:file[:Name]; Hcopy:file[:Name]:Auto; Hcopy:image:format

Remote Control Commands
R&S
®
SMBV100A
558Operating Manual 1176.8016.02 ─ 17
:HCOPy:IMAGe:FORMat <Format>
:HCOPy:DEVice:LANGuage <Language>
Selects the graphic format for the hard copy. You can use both commands alterna-
tively.
Parameters:
<Language> BMP | JPG | XPM | PNG
*RST: PNG
Example: See Example "Store a hard copy of the display" on page 556.
Manual operation: See " File Options " on page 157
:HCOPy[:EXECute]
Generates a hard copy of the current display. The output destination is a file.
The data is written into the file selected/created with the HCOP:FILE commands.
Example:
See Example "Store a hard copy of the display" on page 556.
Usage: Event
Manual operation: See " Save " on page 158
:HCOPy:FILE[:NAME] <Name>
Determines the file name and path to save the hard copy, provided automatic naming
is disabled.
Note: If you have enabled automatic naming, the instrument automatically generates
the file name and directory.
Parameters:
<Name> string
Example: See Example "Store a hard copy of the display" on page 556.
Manual operation: See "File Info" on page 156
:HCOPy:FILE[:NAME]:AUTO?
Queries path and file name of the hard copy file, if you have enabled Automatic Nam-
ing.
Return values:
<Auto> string
Example: See Example "Store a hard copy of the display" on page 556.
Usage: Query only
Manual operation: See " File Options " on page 157
HCOPy Subsystem