Instrument Function
R&S
®
SMBV100A
188Operating Manual 1176.8016.02 ─ 17
Figure 5-6: Example of functionality of pattern ignore: 50 bits were set to "0" by the DUT. These 50
bits plus the preceding "0" are ignored in the bit error rate measurement.
5.4.10 Bit Error Rate Settings
Access:
► Select "Baseband > MISC > Bit Error Rate".
The "Bit Error Rate" dialog contains all the parameters to configure, activate and
evaluate the measurement.
Bit and Block Error Rate Measurements
To Next Page
Loading...
