Preparing for Use
R&S
®
SMBV100A
57Operating Manual 1176.8016.02 ─ 17
The "IP Address Mode" selects a configuration mode for the IP address of the
R&S SMBV. With static configuration, the entered IP address, subnet mask, and
default gateway are used. With dynamic configuration, DHCP or dynamic link local
addressing (automatic IP) are used to obtain the instrument IP address.
See Chapter 2.6.2, "Assigning the IP Address", on page 44.
2.8.2.2 Advanced LAN Configuration
The "Advanced Config" page provides LAN settings that are not declared mandatory
by the LXI standard.
LXI Configuration
To Next Page
Loading...
