Rohde & Schwarz SMBV100A - Mmemory

Remote Control Commands
R&S
®
SMBV100A
674Operating Manual 1176.8016.02 ─ 17
DM Lists
The following section brings together the commands for defining and managing the
data lists and control lists for digital modulation.
Lists are stored as files with specific file extensions in a user-definable directory (see
Table 7-2). To specify the default directory, use the command :MMEMory:
CDIRectory. To access files in this directory, enter their file name; the path and
extension are optional.
Table 7-2: Overview of the used list types
List type Content File extension
Data List Digital modulation data
*.dm_iqd
Control List Digital modulation control data
*.dm_iqc
User Standards User settings of digital modulation
*.dm_stu
Usr Filter Usr filter settings
*.vaf
User Mapping User mapping settings
*.vam
It is not possible to use other file extensions with the commands. Attempting to do so
will cause an error message. If the file extension is changed in any other way (e.g. by
directly accessing the file system) the lists are no longer recognized and therefore
invalid.
The CLISt commands always create a binary control list, even if ASCII format is
specified.
Therefore, to create a *.wv file with R&S WinIQSIM2 using a control list, use the input
control list in ASCII format. Refer to the example in Chapter 7.4.4, "Creating an ASCII
C-List Manually", on page 530 for more information.
List of Commands
[:SOURce<hw>]:BB:DM:CLISt:CATalog?......................................................................... 675
[:SOURce<hw>]:BB:DM:DLISt:CATalog?......................................................................... 675
[:SOURce<hw>]:BB:DM:FLISt:CATalog?..........................................................................675
[:SOURce<hw>]:BB:DM:MLISt:CATalog?......................................................................... 675
[:SOURce<hw>]:BB:DM:CLISt:FREE?............................................................................. 675
[:SOURce<hw>]:BB:DM:DLISt:FREE?............................................................................. 675
[:SOURce<hw>]:BB:DM:FLISt:FREE?..............................................................................675
[:SOURce<hw>]:BB:DM:MLISt:FREE?............................................................................. 675
[:SOURce<hw>]:BB:DM:CLISt:COPY...............................................................................676
[:SOURce<hw>]:BB:DM:DLISt:COPY...............................................................................676
[:SOURce<hw>]:BB:DM:CLISt:TAG?............................................................................... 676
[:SOURce<hw>]:BB:DM:DLISt:TAG?............................................................................... 676
[:SOURce<hw>]:BB:DM:CLISt:DATA............................................................................... 677
[:SOURce<hw>]:BB:DM:CLISt:DELete............................................................................. 678
[:SOURce<hw>]:BB:DM:CLISt:POINts?............................................................................678
[:SOURce<hw>]:BB:DM:CLISt:SELect............................................................................. 678
[:SOURce<hw>]:BB:DM:DLISt:DATA............................................................................... 679
SOURce Subsystem