Remote Control Commands
R&S
®
SMBV100A
568Operating Manual 1176.8016.02 ─ 17
Usage: Query only
Manual operation: See "Directory, File List and File Name" on page 161
:MMEMory:CATalog:LENGth? <Path>
Returns the number of files in the current or in the specified directory.
Query parameters:
<Path> string
String parameter to specify the directory. If the directory is omit-
ted, the command queries the content of the current directory,
queried with :MMEMory:CDIRectory command.
Return values:
<FileCount> integer
Number of files.
Example: See "Working with Files and Directories" on page 566.
Usage: Query only
:MMEMory:CDIRectory <Directory>
Changes the default directory for mass memory storage. The directory is used for all
subsequent MMEM commands if no path is specified with them.
Parameters:
<Directory> <directory_name>
String containing the path to another directory. The path can be
relative or absolute.
To change to a higher directory, use two dots '..' .
Example: See "Working with Files and Directories" on page 566.
Usage: SCPI confirmed
Manual operation: See "Directory, File List and File Name" on page 161
:MMEMory:COPY <SourceFile>[,<DestinationFile>]
Copies an existing file to a new file. Instead of just a file, this command can also be
used to copy a complete directory together with all its files.
Setting parameters:
<SourceFile> string
String containing the path and file name of the source file
MMEMory Subsystem
To Next Page
Loading...
