Rohde & Schwarz SMBV100A - Page 581

Remote Control Commands
R&S
®
SMBV100A
566Operating Manual 1176.8016.02 ─ 17
Storing and Loading Current Settings
1. Store the current setting in an intermediate memory with the number 4. This setting
can be called using command *RCL and the associated number of the memory, for
example *RCL 4.
*SAV 4
2. To store the settings in a file in a specific directory, specify the complete path.
MMEM:STOR:STAT 4,"/var/user/test.savrcltxt"
3. To store the settings in a file in the default drive, set the default drive and specify
only the file name.
MMEM:CDIR '/var/user/'*SAV 4
MMEM:STOR:STAT 4,"test.savrcltxt"
4. Load the file test.savrcltxt in the user directory.
MMEM:LOAD:STAT 4,'/var/user/test.savrcltxt'
5. Activate the instrument setting of the file test.savrcltxt.
*RCL 4
Working with Files and Directories
1. Read out all files in the specified directory.
MMEM:CAT? '/var/usb/user'
Response: 127145265,175325184,"test,DIR,0","temp,DIR,0",
"readme.txt,ASC,1324","state.savrcltxt,STAT,5327",
"waveform.wv,BIN,2342"
the directory /var/usb/user contains the subdirectories test and temp as well
as the files readme.txt, state.savrcltxt and waveform.wv which have dif-
ferent file types.
Tip: To query only the subdirectories of the current or specified directory, perform:
MMEM:DCAT? '/var/usb/user'
Response: 'test', 'temp'
To query only the number of subdirectories in the current or specified directory,
perform:
MMEM:DCAT:LENG? '/var/usb/user'
Response: 2
2. To query the number of files in the current or specified directory, perform:
MMEM:CAT:LENG? '/var/usb/user'
Response: 3
3. Create a new subdirectory for mass memory storage in the specified directory.
MMEM:MDIR '/var/usb/new'
4. Copy the file state to a new file.
MMEM:COPY '/var/user/state.savrcltxt','/var/usb/new'
5. Rename the file state.
MMEMory Subsystem