Rohde & Schwarz SMBV100A - Source:bb:arb:wav Subsystem

Remote Control Commands
R&S
®
SMBV100A
633Operating Manual 1176.8016.02 ─ 17
Parameters:
<Mode> LONG | SHORt | LCM | USER
LONG
The resulting signal period is defined by the longest I/Q file in
the carrier table. Shorter I/Q files are periodically repeated.
SHORt
The resulting signal period is defined by the shortest I/Q file in
the carrier table. Only the first part of longer I/Q files is used.
USER
The signal period can be set with command [:SOURce<hw>]:
BB:ARBitrary:MCARrier:TIME. Shorter I/Q files are repea-
ted periodically, and only the first part of longer I/Q files is used.
LCM
The output file duration is the least common multiple of all input
file durations.
*RST:
LONG
Example:
SPOURce1:BB:ARBitrary:MCARrier:TIME:MODE LONG
selects signal period mode long
Manual operation: See "Signal Period Mode" on page 428
SOURce:BB:ARB:WAV Subsystem
The WAVeform subsystem contains the commands for working with waveform files.
[:SOURce<hw>]:BB:ARBitrary:WAVeform:CATalog?......................................................... 633
[:SOURce<hw>]:BB:ARBitrary:WAVeform:CATalog:LENGth?.............................................634
[:SOURce<hw>]:BB:ARBitrary:WAVeform:CLOCk.............................................................634
[:SOURce<hw>]:BB:ARBitrary:WAVeform:DATA...............................................................635
[:SOURce<hw>]:BB:ARBitrary:WAVeform:DELete.............................................................636
[:SOURce<hw>]:BB:ARBitrary:WAVeform:FREE?............................................................. 636
[:SOURce<hw>]:BB:ARBitrary:WAVeform:POINts?........................................................... 636
[:SOURce<hw>]:BB:ARBitrary:WAVeform:SELect.............................................................637
[:SOURce<hw>]:BB:ARBitrary:WAVeform:TAG?...............................................................637
[:SOURce<hw>]:BB:ARBitrary:WAVeform:CATalog?
Reads out the files in the default directory. The default directory is set using command
MMEM:CDIRectory. When the names of the waveform files are returned they are sep-
arated by commas. Only files with the file extension *.wv will be listed.
Return values:
<Catalog> string
SOURce Subsystem