Instrument Function
R&S
®
SMBV100A
365Operating Manual 1176.8016.02 ─ 17
Remote command:
n.a.
Cut ← Data List Editor
Cuts the selected values.
Remote command:
n.a.
Paste ← Data List Editor
Pastes the values that have been copied or cut before.
Remote command:
n.a.
Hex ← Data List Editor
Switchover to hexadecimal display.
Each four bits are displayed as a hexadecimal value: To increase readability, the hexa-
decimal values in turn are displayed in pairs of two. The hex functions are automati-
cally assigned to the numeric keys at the front panel.
Remote command:
n.a.
Save (Data List) ← Data List Editor
Saves the changes made to the Data List file selected for editing.
Remote command:
n.a.
Control and Marker List Editor
The "Control and Marker List Editor" for editing the selected control list is called up in
the "List Management" submenu of the "Custom Digital Modulation" main menu by
means of the "Edit Control List"... button.
The available marker signals and the CW, Hop, Burst Gate and Level Attenuation con-
trol signals can be defined in the "Control and Marker List Editor".
Baseband Signal - Baseband Block
To Next Page
Loading...
