V L F > H F R E C E I V E R S
f
E K 8 9 5 / E K 8 9 6
Operator Manual
f
Control and Display Elements
Description
The cursor indicates which of the 7>
segment display elements the tuning
knob (34) directly acts upon. The cursor
can be shifted in the frequency field by
means of the cursor control keys (1).
If the cursor fails to appear in the fre>
quency field (9), for the tuning knob the
freely programmed stepwidth is activated.
By actuation of key MENU 1 the following
functions are assigned to the softkeys
(16):
ME+ Storage into the buffer
(see 1.1.11.1)
ME> Calling up the buffer contents
(see 1.1.11.2)
S / C
1)
BYP
2)
Activating or deactivating Digital
Selection FK 896
(see 1.1.11.3 and .4)
1)
It is of no use trying to activate this
function since it is ignored in data link
operation.
2)
The function BYP is only displayed if
the optional FK!896 is installed.
The key MORE is only effective if the
symbol '>' appears on the right in the
softkey assignment field (14).
By actuating key MORE another menu (14)
or another display (36) is called up.
No.
10
11
12
Control or display
element
Design
MENU1
Pushbutton with
protective cap
(6 ¥ 10.5 mm)
MORE
Pushbutton with
protective cap
(6 ¥ 10.5 mm)
6075.6991.82.01
> 1.24 >
To Next Page
Loading...
