Rohde & Schwarz EK 895 - User Manual

Radio Communications Systems
Division
Operator Manual
VLF > HF RECEIVERS
EK 895 EK 896
6057.8996.07 6038.2509.17
Software Version 3.xx Software Version 3.xx
6075.6991.82.01 > 1

Rohde & Schwarz EK 895 Specifications

General

Frequency Range	10 kHz to 30 MHz
IF Rejection	> 80 dB
Image Rejection	> 80 dB
Input Impedance	50 Ω
Modulation Types	AM, SSB, CW, FM
Selectivity	6 kHz at -6 dB (AM)

Summary

1. Operation

1.1 Control Unit 2 LOCAL (EK 895, = Option Control Unit GB 890) or Control Unit (EK 896)

Details operation using the LOCAL control unit for EK 895 or EK 896.

1.2 Control Unit 1 REMOTE (EK 895)

Outlines the operation of EK 895 using the REMOTE control unit.

1.3 Control and Display Elements of Control Unit 2 LOCAL (EK 895, = Option Control Unit GB 890′) or Control Unit (EK 896)

Lists and describes control and display elements for the LOCAL control unit.

1.4 Control and Display Elements of Control Unit 1 REMOTE (EK 895)

Details control and display elements for the REMOTE control unit of EK 895.

2. Remote Control

2.1 General

Explains the general principles and format for remote control commands.

2.2 Operating Modes

Details the MANUAL and CHANNEL operating modes for remote control.

2.3 Basic Settings

Covers essential remote settings such as frequency and modulation mode.

2.4 Special Functions

Describes special functions available for remote operation, like channel call-up.

2.5 System Functions

Details system functions, including inquiries about software version and options.

2.6 List of Commands

Provides a comprehensive list of available commands for remote control.

List of Abbreviations

Definitions

BIT (Built-in test)

Describes the Built-in Test (BIT) function for checking modules and paths.

CM (Continuous Monitoring)

Explains Continuous Monitoring (CM) for permanent equipment function checks.