Need help?Do you have a question about the Rohde & Schwarz PR100 and is the answer not in the manual?
General| Brand | Rohde & Schwarz |
|---|---|
| Model | PR100 |
| Category | Receiver |
| Language | English |
Provides essential safety guidelines for operating the product, including environmental conditions, handling, and electrical safety.
Guides the user through the process of updating the R&S PR100 firmware using an SD card.
Allows configuration of receiver settings such as frequency, demodulation, bandwidth, and antenna.
Enables setting up and configuring various scan modes, including frequency and memory scans.
Covers display settings for different screens like RX, IF-PAN, RF-PAN, and Waterfall.
Provides access to general settings including language, date/time, display options, keys, and audio.
Explains the status reporting system, including registers, bits, and service requests.
Describes common instrument behaviors in error conditions, such as unsupported commands or settings conflicts.
Covers commands for calculating and processing IF-panorama data, including averaging and markers.
Manages display settings, including brightness, color schemes, and window configurations.
Covers measurement modes, time settings, and detector functions for signal measurement.
Handles memory operations, including clearing, configuring, copying, labeling, and sorting memory locations.
Manages mass storage operations, such as listing files, creating directories, copying, and deleting.
Controls output settings for auxiliary signals, antenna selection, IF output, squelch, tone, and audio.
Provides commands for configuring sensor functions, including bandwidth, antenna, demodulation, and detector settings.
Provides commands for querying and configuring status registers, including event, condition, and enable bits.
Manages system-level settings like audio balance, volume, output, beeper, LAN, and security.
To Next Page
