R&S PR100 User Manual
surfaces that are not rigid, such as sofas or carpets, or inside a closed housing,
unless this is well ventilated.
24. Do not place the product on equipment that generates heat, such as a radiator or
fan heater. The ambient temperature must not exceed the maximum temperature
specified in the data sheet.
25. Batteries and storage batteries must not be exposed to high temperatures or fire.
Store batteries and storage batteries out of the reach of children. If batteries or
storage batteries are not replaced appropriately there is a risk of explosion (warning:
lithium cells). Batteries and storage batteries must only be replaced with the
corresponding R&S type batteries (see spare parts list). Batteries and storage
batteries are classed as hazardous waste. Dispose of them only in specially marked
containers. Comply with local regulations concerning waste disposal. Do not short-
circuit batteries or storage batteries.
26. Please be aware that in the event of a fire, the product may emit toxic gases that
can be harmful to your health.
27. Be aware of the weight of the product. Move the product carefully, as its weight
may cause back or other physical injuries.
28. Do not place the product on surfaces, vehicles, cabinets or tables whose weight
and stability make them unsuitable for this product. Always follow the manufacturer's
installation instructions when installing the product and attaching it to objects or
structures (e.g. walls and shelves).
29. Should you decide to use the product inside a vehicle, it is the sole responsibility
of the driver to drive the vehicle safely. Secure the product properly inside the vehicle
to prevent injury or damage in the event of an accident. Never use the product in a
moving vehicle if doing so may distract the driver of the vehicle. The driver is always
responsible for the safety of the vehicle; the manufacturer assumes no responsibility
for accidents or collisions.
30. If a laser product (e.g. a CD/DVD drive) is integrated into an R&S product, do not
use any settings or functions other than those described in the documentation. This
may otherwise be hazardous to your health, since lasers may cause irreversible
optical damage. Never attempt to take such products apart. Never look directly into
the laser beam.
2 Quality certificate
Dear Customer,
Thank you for purchasing a Rohde & Schwarz product.
This product is manufactured using state-of-the-art production methods. It is
developed, produced and tested in accordance with the rules of our Quality
Management System. The Rohde & Schwarz Quality Management System is ISO
9001 certified.
Certified Quality System
ISO 9001
DQS REG. NO 1954-04
To Next Page
Loading...
