Rohde & Schwarz PR100 - 11.3 CALCulate subsystem

R&S PR100 User Manual
11.2 ABORt subsystem
ABORt
Stop command for scans. This command stops an active scan and is the
counterpart of INIT:IMM.
Parameters:
none
Example:
ABORt
11.3 CALCulate subsystem
CALCulate
. :IFPan
. . :AVERage
. . . :TYPE MINimum|MAXimum|SCALar|OFF
Setting of the averaging procedure for the IF-panorama data.
Parameters:
MINimum Keep minimum value of obtained measurements
MAXimum Keep maximum value of obtained measurements
SCALar Average measurements according to a device specific
algorithm
OFF Do not process obtained measurements
Example:
CALCulate:IFPan:AVERage:TYPE MINimum
CALCulate
. :IFPan
. . :AVERage
. . . :TYPE?
Query of the averaging procedure for the IF-panorama data.
Result:
MIN, MAX, SCAL, OFF
Example:
CALCulate:IFPan:AVERage:TYPE? -> MIN