Rohde & Schwarz PR100 - Index

R&S PR100 User Manual
order of increasing frequency). To accomodate both an unordered and an
ordered accesss of the memory locations, the memory list is used.
The memory list has a number of items, one for each memory location. Each
item links to a certain memory location. This way, the order in the memory
locations can remain unchanged, while the list item allow to run through the
memories in another order. See below an example for ordering on increasing
frequency via the memory list:
...
item 55 -> 25 (freq. 100000000)
item 56 -> 6 (freq. 125000000)
item 57 -> 2 (freq. 140000000)
item 58 -> 800 (freq. 160000000)
...
The memory scan (SENS:FREQ:MODE MSC) uses the memory list to run
through all memory locations. The commands below under the MEMory:LIST
subsystem control the order of the memory list.
MEMory
. :LIST
. . :CONTents? <index>
Query to which memory location a list item has been linked
Parameter:
<index> integer number in the range [0,1023]
Result:
0...1023
Example:
MEMory:LIST:CONTents? 25 -> 60