R&S PR100 User Manual
1 Performance Check
Before using the product for the first time, please read the following:
Safety Instructions
Rohde & Schwarz makes every effort to maintain the most stringent safety standards
as regards its products and to guarantee its customers the highest possible level of
safety. Our products and the necessary auxiliary equipment are designed and tested
in accordance with the relevant safety standards. Compliance with these standards is
continuously monitored by our quality assurance system. This product has been
designed and tested in accordance with the EC Certificate of Conformity and has left
the manufacturers' plant in a condition that complies fully with safety standards. To
maintain this condition and to ensure safe operation, please take note of all the
instructions and warnings appearing in this manual. Should you have any questions
regarding these safety instructions Rohde&Schwarz will be happy to answer them.
Furthermore, you are responsible for using the product in an appropriate manner.
This product is designed solely for use in industrial and laboratory environments, or
in the field, and must not be used in any way that may cause personal injury or
damage to property. The user bears responsibility if the product is used for any
purpose other than that for which it was designed or if the manufacturer's instructions
are disregarded. The manufacturer accepts no liability for misuse of the product.
The product is considered as being used for its designated purpose where it is used
in accordance with the relevant operating manual and within its performance limits
(see data sheet, documentation, the following safety instructions). Using the products
requires technical skills and a knowledge of English. It is therefore essential for the
products to be used only by skilled and specialized staff or thoroughly trained
personnel with the required skills. Should personal protective equipment be
necessary for using R&S products, this will be indicated at the appropriate place in
the product documentation.
To Next Page
Loading...
