PROGram
. : PRESet
. . :SELect <name>
Recalls all settings of a preset with the name <name>, and restores those
settings in the device. When a preset with the specified name is not present,
the error -292, “Referenced name does not exist” is generated.
Parameters:
<name> String of characters enclosed in double quotes
Example:
PROG:PRES:SELect “User Preset 1”
11.14 SENSe Subsystem
[SENSe]
. :BANDwidth|BWIDth
. . [:RESolution] <numeric_value>|UP|DOWN|MINimum|MAXimum
Selection of bandwidth of demodulation path. Only certain bandwidths are
allowed. If a number is specified, the smallest bandwidth that is still larger is
selected.
Parameters:
<numeric_value> bandwidth in Hz
UP|DOWN to next|previous bandwidth
MINimum|MAXimum setting the narrowest|widest bandwidth
Example:
BANDwidth 2.4 kHz
[SENSe]
. :BANDwidth|BWIDth
. . [:RESolution]? [MINimum|MAXimum]
Query of current IF bandwidth.
Parameters:
none query of current bandwidth
MINimum|MAXimum query of narrowest|widest bandwidth
Result:
bandwidth in Hz
Example:
BANDwidth? -> 2400
To Next Page
Loading...
