Rohde & Schwarz PR100 - 11.5 DISPlay subsystem

R&S PR100 User Manual
DIAGnostic
. [:SERVice]
. . :INFO
. . . :SVERsion?
Query of the software version.
Parameters:
none
Result:
Software version
Example:
DIAGnostic:INFO:SVERsion? -> V[12.34]
“V” indicates this is a release version, “B” is for beta versions
12 is the major version number
24 is the minor version num
11.5 DISPlay subsystem
DISPlay
. :BRIGhtness <numeric_value>|MINimum|MAXimum
Controls the brightness of the display backlighting.
Parameters:
<numeric_value> brightness of backlighting from 0.00 to 1.00
0.00 = backlighting off
1.00 = full backlighting
MINimum|MAXimum backlighting off|full backlighting
Remark:
The brightness can be set between 0.00 and 1.00 with 2 decimals resolution.
Example:
DISPlay:BRIGhtness 0.45
DISPlay
. :BRIGhtness? [MINimum|MAXimum]
Query of brightness of display backlighting.
Parameter:
none query of current brightness
MINimum|MAXimum query of lowest|highest brightness
Result:
Brightness of backlighting from 0.00 to 1.00