Rohde & Schwarz PR100 - 6.12 Software update

R&S PR100 User Manual
Set the time
Enter the date using the numeric keypad and confirm it by pressing ENTER.
Once the minutes have been entered, the R&S PR100 checks whether the time
entered is valid. If the time is not valid, the R&S PR100 will set the next valid time.
6.12 Software update
To operate the R&S PR100 with the latest features, it is recommended to install the
newest firmware version.
A new firmware version can be down loaded via the R&S website. In order to install
the firmware, it must first be copied onto an SD Card, e.g. HA-Z231, order
#1309.6217.00. You can also follow the link on the CD supplied with the instrument.
Copy the following files from your PC to the root directory of the SD-card:
The version number of the files varies with the stand of the firmware.
Note!
Please make sure that only one file of each type is present on
the SD card. The update mechanism will reject the card if it
detects two versions of a file type and abort the update later on