Rohde & Schwarz PR100 - 11.4 DIAGnostic subsystem

R&S PR100 User Manual
d
CALCulate
. :PSCan
. . :MARKer:MAXimum:LEFT
Moves the reveiver frequency to the maximum that lies to the left of the
current frequency in the RF-panorama scan. This changes the receiver
frequency SENS:FREQ:CW. If squelch is on, only the maxima that are above
the squelch level are taken into account.
Parameters:
none
Example:
CALCulate:PSCan:MARKer:LEFT
d
CALCulate
. :PSCan
. . :MARKer:MAXimum:RIGHt
Moves the reveiver frequency to the maximum that lies to the right of the
current frequency in the RF-panorama scan. This changes the receiver
frequency SENS:FREQ:CW. If squelch is on, only the maxima that are above
the squelch level are taken into account.
Parameters:
none
Example:
CALCulate:PSCan:MARKer:RIGHt
11.4 DIAGnostic subsystem
DIAGnostic
. [:SERVice]
. . :ADAPter
. . . [:STATe]?
Query whether the instrument is currently being powered by a mains adapter.
Result:
0 Instrument is powered by internal battery.
1 Instrument is powerred by mains adapter.
Example:
DIAGnostic:ADAPter? -> 1
d