Rohde & Schwarz PR100 - Page 109

R&S PR100 User Manual
d
CALCulate
. :PSCan
. . :CLEar
Restart of the averaging function for the panorama-scan data. The values for
each bin in the FFTs measured thus far are deleted, and new values are
obtained.
Parameters:
none
Example:
CALCulate:PSCan:CLEar
d
CALCulate
. :PSCan
. . :MARKer:MAXimum[:PEAK]
Moves the reveiver frequency to the FFT-bin with the absolute-level maximum
in the RF panorama. This changes the receiver frequency SENS:FREQ:CW
Parameters:
none
Example:
CALCulate:PSCan:MARKer:MAXimum