Manuals R&S FSH
1145.5973.82 0.2 E-11
Service and Repair
If your equipment requires service or repair or if you want to order spare parts and modules, please
contact your Rohde & Schwarz support center or our spare parts express service.
Rohde & Schwarz representatives and the address of our spare parts express service are listed in the
front section of this service manual.
You will need to provide the following information in order for us to respond to your inquiries quickly and
accurately and to determine whether the warranty for your instrument is still valid:
• Instrument model
• Serial number
• Firmware version
• Detailed error description in case of repair
• Contact partner for checkbacks
Rohde & Schwarz offers the following calibrations:
• Calibration on R&S-type test systems. The calibration documentation meets the requirements of the
quality management system ISO 9000.
• Calibration at an R&S calibration center approved by the German Calibration Service (DKD). The
calibration documentation consists of the DKD calibration certificate.
Refer to Chapter 5 for a detailed description of how to ship the instrument and to order spare parts.
To Next Page
Loading...
