To Next PageTo Next Page
Need help?Do you have a question about the Rohde & Schwarz R&S FSH and is the answer not in the manual?
General| Dynamic Range | > 100 dB |
|---|---|
| Resolution Bandwidth (RBW) | 1 Hz to 3 MHz |
| Displayed Average Noise Level (DANL) | -155 dBm (typical) |
| Amplitude Accuracy | ±0.5 dB |
| Tracking Generator | Available as an option |
| Interfaces | USB, LAN |
| Input VSWR | ≤1.5:1 |
| Input Impedance | 50 ohms |
Illustrates and defines safety symbols and labels used on the product.
Explains the meaning of safety tags like DANGER, WARNING, CAUTION, ATTENTION.
Provides fundamental safety guidelines for operating the product.
Details required information for service, repair, and warranty inquiries.
Describes the types of calibration services offered by Rohde & Schwarz.
Outlines test procedures and lists required measurement equipment.
Covers tests for frequency, level, attenuator, IF gain, noise floor, and phase noise.
Details the procedure for checking the linearity of the instrument's display.
Describes tests for the tracking generator's output level and frequency response.
Describes quick checks for hardware functionality before full testing.
Provides instructions for manual adjustments and necessary equipment.
Details the instrument's design, block diagram, and functional modules.
Explains the process of converting RF signals to IF for digital processing.
Describes the tracking generator function and RF/IF control mechanisms.
Covers the mainboard functions, power supply, and battery management.
Lists modules, spare parts, and general procedures for disassembly/reassembly.
Step-by-step guide for replacing the instrument's battery.
Instructions for replacing the instrument's bottom, rear, grip, or top covers.
Lists common errors, their probable causes, and suggested corrective steps.
Addresses problems related to the instrument not switching on.
Covers issues with display colors, characters, and noise.
Provides information on updating the instrument's firmware via the R&S website.
Lists available software options for the R&S FSH and their order numbers.
Guidelines for packing and shipping the instrument and its modules.
Details required information for ordering replacement parts and modules.
Procedures for returning defective modules for repair or credit.
