R&S FSH Adjustment
1145.5973.82 2.5 E-11
Adjustment
This section describes the measurement equipment and accessories required for the manual
adjustment of the R&S FSH, the appropriate preparations of the equipment, and the individual
adjustments.
An adjustment program provides the instructions for the input settings.
Adjustment Instructions
• The adjustment of the analyzer must be performed after a warm-up time of at least 30 minutes. Only
by adhering to this requirement can compliance with the guaranteed data be ensured.
• Inputs for setting the R&S FSH during adjustment will be programmed automatically.
To Next Page
Loading...
