Rohde & Schwarz R&S FSH - Page 49

Measurement Equipment and Accessories R&S FSH
1145.5973.82 2.6 E-11
Measurement Equipment and Accessories
Item Type of
equipment
Specifications recommended Equipment
recommended
R&S order
no.
Use
1 Signal generator Frequency: 10 MHz to 3 GHz
Uncertainty of frequency: 0.1 ppm
Phase noise at 500 MHz:
< -100 dBc (1Hz) @ 10 kHz
< -110 dBc (1Hz) @ 100 kHz
< -130 dBc (1Hz) @ 1 MHz
R&S SML Frequency accuracy of
reference oscillator
2 6-dB divider
(power splitter)
Frequency response
3 Power meter R&S NRVD 0857.8008.02 Frequency response
4 Power sensor 1 MHz to 3 GHz
RSS  0.8%
Meter noise  20 pW
R&S NRV-Z4 0828.3618.02 Frequency response
Adjusting the reference frequency accuracy
Test equipment Signal generator (refer to section "Measurement Equipment and
Accessories", item 2)
Test setup  Connect the generator to the RF input.
Generator settings
- Frequency 1 GHz
- Level -30 dBm
R&S FSH settings - [ PRESET ]
- [ FREQ : 1 GHz ]
- [ SPAN : 100 kHz ]
- [ BW : MANUAL RES BW : 10 kHz ]
- [ MARKER : MARKER MODE : FREQ COUNT ]
Adjustment The program will adjust the reference oscillator to 10 MHz ± 1 ppm.