Rohde & Schwarz R&S FSH - Software Updates; Installing Options; Installing New R&S FSH Software; Installing Options

R&S FSH Installing New R&S FSH Software
1145.5973.82 4.1 E-11
4 Software Updates / Installing Options
T
his chapter provides information on software updates and how to install options on the R&S FSH.
Additional manuals supplied along with software/firmware updates or with options obtained later can be
recorded here.
Installing New R&S FSH Software
A new firmware version can be installed via the R&S website. You can download the newest software
version, and the new software can be loaded onto the R&S FSH by using the setup program.
The instructions are included in the program.
Installing the Options
The following options are available with the R&S FSH:
Distance to Fault Measurement for R&S FSH R&S FSH-B1 1145.5750.02
Remote Control via RS-232-C R&S FSH-K1 1145.3458.02
Vector Transmission and Reflection Measurements R&S FSH-K2 1145.3387.02