Rohde & Schwarz R&S ZNB20 - Page 259

GUI Reference
R&S
®
ZNB/ZNBT
259User Manual 1173.9163.02 ─ 53
Furthermore, provides functions for renumbering the logical ports.
Remote command:
SOURce<Ch>:LPORt<LogPt>
SOURce<Ch>:LPORt<LogPt>:CLEar
Reference Impedance Tab
The "Reference Impedance" tab of the "Balanced Ports" dialog allows you to define (or
redefine) the impedances of the logical ports.
Background information
Refer to Chapter 5.3.2, "Reference Impedances", on page 119.
Figure 6-1: Reference Impedance Tab (4 physical ports)
Figure 6-2: Reference Impedance Tab (>4 physical ports)
Meas Softtool