Rohde & Schwarz RTA4000 - Quick Access

Operating basics
R&S
®
RTA4000
43User Manual 1335.7898.02 ─ 08
4. Close the dialog box.
4.6 Quick access
If the measurement task requires to change the settings from different menus repeat-
edly, you can use the "QuickAccess". The "QuickAccess" is a user-defined menu,
which can be added to the toolbar.
To configure the "QuickAccess" menu:
1. Add the "QuickAccess" icon to the toolbar as described in "Configuring the Toolbar"
on page 42.
2. Add the required settings and functions to the "QuickAccess" menu:
a) Open the menu that contains the setting.
b) Drag the setting from the menu and drop it on the diagram.
The setting is added to the "QuickAccess".
Quick access