Rohde & Schwarz RTA4000 - Page 548

Remote control commands
R&S
®
RTA4000
548User Manual 1335.7898.02 ─ 08
SPECtrum:WAVeform:MINimum:DATA:HEADer?
SPECtrum:WAVeform:SPECtrum:DATA:HEADer?
Returns information on the indicated waveform.
Return values:
<Header> StringData
Usage: Query only
SPECtrum:WAVeform:AVERage:DATA:POINts?
SPECtrum:WAVeform:MAXimum:DATA:POINts?
SPECtrum:WAVeform:MINimum:DATA:POINts?
SPECtrum:WAVeform:SPECtrum:DATA:POINts?
Returns the number of data samples that are returned with
SPECtrum:WAVeform:xxx:DATA for the indicated waveform.
Return values:
<DataPoints>
Usage: Query only
SPECtrum:WAVeform:AVERage:DATA:XINCrement?
SPECtrum:WAVeform:MAXimum:DATA:XINCrement?
SPECtrum:WAVeform:MINimum:DATA:XINCrement?
SPECtrum:WAVeform:SPECtrum:DATA:XINCrement?
Return the level difference between two adjacent samples of the indicated waveform.
Return values:
<Xincrement>
Usage: Query only
SPECtrum:WAVeform:AVERage:DATA:XORigin?
SPECtrum:WAVeform:MAXimum:DATA:XORigin?
SPECtrum:WAVeform:MINimum:DATA:XORigin?
SPECtrum:WAVeform:SPECtrum:DATA:XORigin?
Returns the frequency of the first sample of the indicated waveform.
Return values:
<Xorigin>
Usage: Query only
SPECtrum:WAVeform:AVERage:DATA:YINCrement?
SPECtrum:WAVeform:MAXimum:DATA:YINCrement?
SPECtrum:WAVeform:MINimum:DATA:YINCrement?
SPECtrum:WAVeform:SPECtrum:DATA:YINCrement?
Returns the voltage value per bit of the indicated waveform.
Applications