Operating the Instrument
R&S
®
RTE
85Getting Started 1326.1026.02 ─ 08
To scroll the signal bar
If the signal bar contains more than four icons, not all icons are visible on the dis-
play
.
► Touch one of the signal icons and move it up or down until the required icon
appears.
To switch on and off the signal bar
If you need the complete screen to see the diagrams and results, you can switch
off the signal bar completely.
► Tap the "Show signal bar" icon on the toolbar.
Alternatively, tap "Signal Bar" on the "Display" menu.
T
o change the position of the signal bar
► Touch the "Horizontal" label on the top of the signal bar and drag it to the
opposite side of the screen.
To configure auto-hide
The signal bar can be hidden if the displayed information has not changed for a
defined time, and is displayed again automatically when a setting in the signal bar
changes. The signal bar does not hide entirely, it simply fades and becomes less
visible in the display.
1. Press the [DISPLAY] key on the front panel.
2. In the "Display" dialog box, select the "Diagram Layout" tab.
3. Select "Auto-hide".
4. Define the hiding properties:
● "Hide bar after": the time after which the bar is hidden if no changes occur
● "Hiding transparency": Transparency of the hidden signal bar on a scale
from 20% (low transparency) to 70% (high transparency)
● Hide head also: the horizontal and trigger labels are also faded
Using the Signal bar
To Next Page
Loading...
