Operating the Instrument
R&S
®
RTE
95Getting Started 1326.1026.02 ─ 08
●
For results of automatic measurements: in a docked tab below the diagram
The default position and the font size can be adjusted.
T
o arrange a result box on the display
► Touch the title of the result box and drag the box on the screen. The Smart-
Grid indicates where the result box will be placed.
● If you drop the box on one of the buttons, the results are shown in a sepa-
rate tab besides, above, or below the diagram.
● If you drop the box on the signal bar, a result icon is created.
● If you drop the box somewhere else, a floating result box is created.
1 = Floating result box
2 = Table in a tab on the left or right
3 = Table in a tab above or below
4 = New tab
To open the corresponding setup dialog box
►
In the result box, tap the
icon. Alternatively, double-tap the results.
The dialog box with corresponding settings opens.
Displaying Results
To Next Page
Loading...
